1 / 4 isa-plan ? // prec isi o n r e sis t or s pbv isabellenhtte heusler gmbh & c o . kg // sales.components@isabellenhuette.de // issue 10-november-2016 // c u rrent valid issue: see www.isabellenhuette.de ? power modules ? frequency converters ? s witch mode power supplies ? up to 10 w permanent power ? 4 -terminal connection ? p ulse power rating 2 j for 10 ms ? e x cellent long-term stability ? r o hs 2011/65/ e u c ompliant features applications technical data r es istance values ohm 0.0005 to 1 t ole rance % 0.5 / 1 / 5 t e mperature coeffcient (20-60 c) ppm/k <30 for values r010 <75 for values < r 0 10 applicable temperature range c -55 to +125 power rating w 3 / 10 (on a heatsink) thermal resistance to ambient (rth) k/w <15 thermal resistance to aluminium substrat (rthi) k/w <3 <6 for parts < r 0 02 dielectric withstanding voltage v ac 500 inductance nh <10 stability (nominal load) deviation, t k = t er minal temperature < 0 .5 % a fter 2000 h (t k = 7 0 c) ordering code pbv - r 0 01 - f1 - 1.0 t ole rance t erminal r e sistance value [ o h m] / ? r r epresents decimal point t y pe a l l d a t a s h e e t . c o m
2 / 4 isa-plan ? // prec isi o n r e sis t or s pbv isabellenhtte heusler gmbh & c o . kg // sales.components@isabellenhuette.de // issue 10-november-2016 // c u rrent valid issue: see www.isabellenhuette.de recommended solder profle refow- and ir-soldering t emperature c 260 255 217 t ime sec peak 40 90 packaging information specifcation din e n 60286-3 parts per tube pcs 25 assembly instruction max. allowed torque for screws m3 1 nm resistance values tolerance 0.5 % tolerance 1 % tolerance 5 % r 0005 ? ? r 0015 ? r 001 ? ? ? r 002 ? ? r 0022 ? ? r 003 ? ? r 0033 ? ? r 0047 ? r 005 ? ? r 0068 ? ? r 010 ? ? r 015 ? ? r 020 ? ? r 022 ? ? r 025 ? ? r 033 ? ? r 047 ? r 050 ? ? r 068 ? ? r 100 ? ? r 150 ? ? r 200 ? r 220 ? r 500 ? 1 r 00 ? available standard resistance values and tolerances* * further values and tolerances on request ? = available a l l d a t a s h e e t . c o m
3 / 4 isa-plan ? // prec isi o n r e sis t or s pbv isabellenhtte heusler gmbh & c o . kg // sales.components@isabellenhuette.de // issue 10-november-2016 // c u rrent valid issue: see www.isabellenhuette.de mechanical dimensions [mm] and marking temperature dependence of the electrical resistance power derating curve heatsink mounted r 2 mohm; p = 10 w without heatsink (p = 3 w) heatsink mounted r <2 mohm; p = 10 w t e rminal temperature t k [c] p/p nom d r / r 2 0 [%] -1,00 -0,75 -0,50 -0,25 0,00 0,25 0,50 0,75 1,00 -55 -30 -5 20 45 70 95 120 145 170 tcr = 0 ppm/k tcr = -30 ppm/k tcr = +30 ppm/k 0 0,25 0,5 0,75 1 1,25 0 20 40 60 80 100 120 140 160 180 temperature [c] a l l d a t a s h e e t . c o m
isabellenhtte heusler gmbh & c o . kg // sales.components@isabellenhuette.de // issue 10-november-2016 // c u rrent valid issue: see www.isabellenhuette.de 4 / 4 isa-plan ? // prec isi o n r e sis t or s pbv disclaimer // all products, product specifications and data are subject to change without notice. the product specifications do not expand or otherwise modify isabellenhttes terms and conditions of sale, including but not limited to, the warranty expressed therein. isabellenhtte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale. information provided in datasheets and/or specifications may vary from actual results in different applications. any statements made by isabellenhtte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often placed on its products. it is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in the application intended. no license, express or implied, or otherwise, to any intellectual property rights is granted by this document. any and all liability arising out of the application or use of any product shall be as set forth in isabellenhttes terms and conditions of sale. specifcation parameters test conditions specifcation maximum temperature for full power operation ( r > 2 mohm ) 70/90 c 65/95 c working temperature -55 to 125 c -55 to 125 c solderability mil-s t d-202 method 208 > 95 % coverage r esistance to solvents mil-std-202 method 215, 2.1a, 2.1d no damage low t emperature storage and o peration mil-s t d-26 e 0.1 % life mil-s t d-26 e 0.2 % high t emperature e xposure 125 c, 2000 h 0.2 % r esistance t emperature c haracteristic mil-std-202 method 304 (20-60c) < 30 ppm/k t hermal e mf 0 - 100 c 2 v/k max. frequency c haracteristic inductivity < 10 nh 0,0001 0,001 0,01 0,1 1 10 100 0,01 0,1 1 10 100 1000 10000 0,000001 0,00001 0,0001 0,001 0,01 0,1 1 10 100 maximum pulse energy respectively pulse power for permanent operation 10000 1000 pulse energy [j] pulse width [sec] power [w] t his curve is only valid for the resistance value r 0005. t he progression of the curve in the lower range could be different for other resistance values. t herefore a separate qualification should be made in thresholds. a l l d a t a s h e e t . c o m
|
